deoxidizing
英
美
网络 脱氧; 去氧
双语例句
- Equilibrium constant of reaction of CO deoxidizing zinc oxide and generating gaseous zinc and CO_2
CO还原氧化锌生成气态锌和CO2反应的平衡常数 - On this basis, the effect of the supersaturation degree of deoxidizing elements on the size distribution of deoxidizing products and the relationship between the total oxygen content of extra-low steel and the amount and size of oxide inclusions are discussed.
在此基础上，探讨脱氧元素过饱和度对脱氧产物尺寸分布规律的影响，以及超低氧钢全氧含量与氧化物夹杂数量和尺寸的关系。 - Third the influence of the liquid steel flowing on the eliminating of firstly deoxidizing products is studied;
研究了钢液流动现象对一次脱氧去除的影响； - The preparation of ultrafine WO_3 powders and the deoxidizing and carbonizing of WO_3 to WC were studied. Well abrasive resistant metal composite coating strengthened by ultrafine WC particles was prepared by flame thermal spray method and abrasive wear property was studied.
本文探索了超细WO3粉的制备及其还原碳化为WC粉的方法，采用火焰热喷涂工艺，制备了耐磨性能较好的超细WC陶瓷&金属复合涂层，并研究了涂层的耐磨性能。 - The size of deoxidizing products increases with the increased degree of supersaturation of deoxidizing elements;
脱氧产物尺寸随脱氧元素过饱和度增加而增加； - The composition of the secondly and thirdly deoxidizing products can be controlled through controlling the content of aluminum and calcium of the strong deoxidizing elements, making them have good distortion ability in hot work.
二次和三次脱氧产物的成分可以通过控制钢液中强脱氧元素铝和钙的含量来控制，使它们具有良好的热加工变形能力。 - The technology of aluminium deoxidizing and alloying has been studied. That is, after preliminary argon blowing and oxygen detecting for the aluminum containing steel, determine the feeding amount of aluminium according to the oxygen content in steel and then reblow argon.
对含铝钢经预吹氩定氧后，根据钢中氧含量确定加铝量，再补吹氩的铝脱氧合金化工艺进行研究和探索。 - R.F. Mushet contributed the technique for deoxidizing the converted metal that made the process a success.
穆谢特又提供了将转变后的金属退氧化的技术，使该过程得以成功。 - GC is used in the processing of various resins and deoxidizing agent as well.
同时绿碳化矽也用于各种树脂和脱气处理。 - The feasibility of producing quality cold rolled sheets through deoxidizing and alloying with Fe-Al-Mn alloy and a process of producing low-carbon aluminium killed steel through deoxidizing and alloying are introduced.
介绍了攀钢用铝锰铁脱氧合金化生产高级别冷轧薄板用钢的可行性和脱氧合金化生产低碳铝镇静钢的工艺路线。