slivers

英 [ˈslɪvəz]

美 [ˈslɪvərz]

n.  (切下或碎裂的)小块，薄片
sliver的第三人称单数和复数

柯林斯词典

• N-COUNT 小片;一点儿
  Asliver ofsomething is a small thin piece or amount of it.
  1. Not a sliver of glass remains where the windows were...
     窗户上连一点儿玻璃碎片都没有留下。
  2. There was only one sliver of light in the darkness.
     黑暗中只有一点零星的光亮。

双语例句

• Model BS368 Lap Draw Frame is a high efficient preparation machine for Comber, easy operation, high automation and reasonable doubling of slivers and drafting ratio.
  BS368型条并卷机是高效的精梳准备设备，操作简单，自动化程度高，棉条合并数、牵伸倍数分配合理。
• The quality of the drafted slivers performance is the primary indicator which is used to evaluate the effects of the drafting. Therefore, the study on drafting is aimed to obtain better yarn qualities.
  牵伸后的纱条质量是评定牵伸效果的主要指标，因此对于牵伸的研究是以获得好的成纱质量为目的的。
• As with the breaker drawing, rollers moving at different speeds smooth and combine the slivers and pull them into a thin layer then into the drawn sliver.
  正如头道并条一样，不同速度的罗拉将条子并合、理顺并牵伸成薄层，然后并合成熟条。
• It was found that fibers of circular cross section produce greater cohesion in webs and slivers than do trilobal fibers.
  圆形横截面纤维在棉网和棉条中，比三叶形横截面纤维能产生较大的粘着作用。
• Conversion of caster from the curved to the vertical bending one is the most effective measures to eliminate the pipe listers and slivers for cold rolled Ti SULCAK ( Ti-beating extra low carbon steel sheet).
  为了消除TiSULCAK（含Ti超低碳铝脱氧镇静钢）钢冷轧薄板上的铅笔型气泡，将铸机从弧型改为立弯型是最有效的措施；
• These slivers can be further reduced in diameter and then twisted and plied in yarns of various sizes using textile machinery and processes similar to those employed for other staple materials.
  这些纱条的直径可以进一步减小，然后经过加捻、合股，采用与其它纤维材料加工类似的工艺，制成不同规格的纱线。
• WHISKERS: Slivers of steel left at top rim, or bottom of cage pocket, on cage; a undesirable defect.
  金属须：留在保持架窗口上面或者边缘的金属丝，一种不合理的缺陷。
• The motion of floating fibers during drafting has been considerably studied with the aim to control the floating fibers effectively, and to improve the slivers regularity.
  有效地控制须条在牵伸区内浮游纤维的运动，使其变速点分布更为合理，尽可能降低条干不匀率，是牵伸理论研究的基本问题。
• The second time, however, eight slivers from the first finisher-drawing step are subjected to the same operation. Cotton cloth is made in a cotton mill.
  在进行第二次并条时，第一个并条机生产的八根棉条被送到第二个并条机上进行同样的梳理。
• The study on the drafting force is the key issue in the research of drafting theory. The drafting force and its CV not only reflect the process of drafting, but also indirectly indicate the quality of the output slivers.
  牵伸力是牵伸理论研究中的关键问题，牵伸力及其不匀不但能反映牵伸过程的顺利程度，也能间接反映输出纱条的成纱质量。